Cabling; Cable Attachment - Brainlab CURVE System And Technical User Manual

CAMERA CART
4.2

Cabling

4.2.1

Cable Attachment

General Information
The Curve system offers wired camera communication with the Monitor Cart. The cabling
procedure is described below.
Cabling Precautions
Ensure that camera cable is not attached to any other device than the Monitor Cart.
Disconnecting Camera Cable
When disconnecting cables, do not twist the plug. Grasp the plug, rather than the cable,
and pull it straight out.
Store the camera cable on the hooks of the Camera Cart, even when using a Camera Cart with
wireless camera communication.
How to Attach Camera Cable
Step
1.
2.
3.
4.
5.
6.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Ensure that Monitor Cart is turned off.
Connect camera cable to camera port on the Monitor Cart.
Connect camera cable to camera port on the Camera Cart.
Lightly pull the cable at each end to check that locking mechanism is engaged.
Connect mains power to Monitor Cart and wall power outlet.
Power up system by switching on the Monitor Cart.
Figure 23
61