Protection Cover For Monitors - Brainlab CURVE System And Technical User Manual

CLEANING
8.1.3

Protection Cover for Monitors

Illustration
Do Not Use
• Acid solvents
• Caustic solvents with pH value higher than 9.5
How to Clean the Protection Covers
Step
1.
2.
3.
4.
NOTE: If a soiled cover cannot be sufficiently cleaned using the above steps, exchange the cover
for a new one.
Do not wash, soak, iron or sterilize protection covers.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Remove protection covers from Monitor Cart.
Use a surface disinfectant to clean the surface.
Follow disinfectant manufacturer's recommendations.
NOTE: Use only a moist cloth to clean surfaces. Do not allow the protection cover to be-
come soaked with disinfectant.
Clean the outside surfaces of the protection covers. Do not clean surfaces on the inside
of the cover.
Allow the protection covers to fully dry before applying to the system.
Figure 64
131