Operating Position - Brainlab CURVE System And Technical User Manual

CAMERA CART
4.3.3

Operating Position

Positioning Considerations
In case of interference with other devices caused by the IR light emitted by the camera, reposition
the camera and/or affected device until there is no longer interference.
Reflections of IR light, (e.g., from drapes or shiny surfaces), may interfere with the camera's ability
to correctly track instruments. The same may be true of the camera's IR light, which can interfere
with other devices, (e.g., pulse oximeter, remote control systems or IR sensitive microscopes).
Safe Positioning
Lock all four wheel brakes when Camera Cart is in operating position.
Do not place Camera Cart or any of its parts over the patient.
Related Links
7.1.2 Camera Cart Brakes on page 107
7.2 Docking Camera and Monitor Carts on page 108
How to Put Camera Cart into Operating Position
Step
1.
2.
3.
4.
5.
6.
7.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Ensure that Camera Cart is in transport position.
Using the transport handle, move Camera Cart to desired location.
Lock all four wheel brakes.
Remove camera protection cover.
Grip camera handle and move camera arm to desired position
NOTE: The gas spring of the camera joint keeps the camera in desired position.
Plug camera cable into Monitor Cart.
Attach Sterile Camera Handle Sleeve to camera handle.
67