Brainlab CURVE System And Technical User Manual page 109

TRANSPORT
How to Apply Protection Cover to Monitors
Step
1.
2.
3.
4.
How to Apply Protection Cover to Camera
Step
1.
2.
3.
Warning
Camera must be secured with the protection cover strap to prevent unintentional
movement during transport.
To avoid overheating, ensure that the camera has been turned off for at least five minutes
before applying the protection cover.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Shut down, turn off and unplug system.
After the monitor has cooled down, pull monitor protection cover over the monitor.
Ensure that cover sits properly on monitor.
Secure Velcro fasteners ① at back of monitor protection cover.
①
Ensure that Camera Cart is secured in parking position and the camera is turned off and
completely cooled down.
Pull camera protection cover ① over the camera.
Secure camera to the camera post using the protection cover Velcro strap ②.
NOTE: To complete this step, the Camera Cart must be in transport/storage position.
Figure 56
②
109