Curve Em System Setup - Brainlab Curve Dual Navigation Station System User's Manual

System Setup
2.2.2

Curve EM System Setup

General Information
Monitor Cart and EM Tracking unit are delivered pre-installed and ready for use. All system
components are suitable for continuous use during surgical procedures.
How to Safely Position the System
Steps
1.
2.
3.
4.
5.
6.
7.
8.
Interference
The system produces electromagnetic fields that may interfere with other sensitive
equipment, and can itself be disturbed by other electromagnetic fields.
MR Safety
The EM Tracking unit is not intended for use in an MR environment as the magnetic fields
created by the EM Field Generator and MR scanner may influence each other.
The Curve EM system has not been tested in an MR environment.
24
Remove protection cover from Monitor Cart before entering the OR.
Move equipment into the OR.
Position the Monitor Cart in the OR.
NOTE: Do not position the monitor or any other part of the Monitor Cart
directly over the patient.
Lock all brakes on Monitor Cart.
Unpack and set up EM Tracking unit.
Move monitor into desired position.
Connect all cables at the connection panel of the Monitor Cart.
Connect EM instruments to the EM Base Station.
System User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
See
Page 108
Page 119
Page 119
Page 105
Page 123
Page 44
Page 48
Page 86