Troubleshooting: Ups; Ups Audio Signals - Brainlab CURVE System And Technical User Manual

Troubleshooting: UPS

9.4 Troubleshooting: UPS
9.4.1

UPS Audio Signals

Signals
Occurrence
UPS occasionally emits a beep, but the
system is operating normally.
UPS emits a long beep followed by
short beeps, then the system shuts
down.
140
Possible Cause
UPS is briefly transferring the system to its alternate
power source due to power problems (typically volt-
age burnouts, surges or spikes).
This operation is normal as it protects the system from
abnormal utility voltages.
The UPS battery is completely empty. Fully charge the
UPS before using the system again.
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2