Touch Current For Medical Electrical Systems - Brainlab CURVE System And Technical User Manual

ELECTRICAL SAFETY
10.4.3

Touch Current for Medical Electrical Systems

General Information
The touch current test for medical electrical systems repeats some of the steps in the standard
equipment leakage current test.
Test Overview
Connect the measurement tip of your measuring device with the conductive part and measure the
leakage current.
Measuring Test Points at Monitor and Camera Carts
Point Tested
On/off button
Composite In plug at con-
nection panel
Tracking system connection
at Connection Panel
Screw on camera rotation
hinge
Camera pitch hinge
Screw on left under side of
Camera Cart transport han-
dle
System and Technical User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Measured Value Test
Passed?
159