System Startup Procedure - Advanced Energy AE 75TX Installation And Operation Manual

Advanced Energy® AE ?STX and A E 100TX Inverters
Operation
SYSTEM STARTUP PROCEDURE
fil
WARNING:
Before turning on the inverter, ensure that the front panels are closed
properly.
it
AVERTISSEMENT:
Assurez-vous de la bonne fermeture des panneaux anterieurs avant de
mettre l'onduleur en route.
To Start the Inverter
1. Tum the ON/OFF switch to the OFF position.
The ON/OFF switch is located next to the display screen.
Pause/scroll button
ON/OFF switch
Figure 5-1. Inverter display
2 . Check the polaiity of the DC positive and negative connectors to ensure they
ai·e wired con ectly.
3. Conf um the PV panel open circuit voltage is at or below 600 VDC.
4 . Close all upper and lower cabinet doors.
5. Tum on the external AC connection to the inve1ter.
6. Tum the inve1ter's AC disconnect to the power ON position.
The display on the upper front panel should now be active.
7 . Tum on the external DC disconnect to provide DC power to the inve1 ter.
570-1001793-058 Operation 5-1