Chapter 4. Installing; Handling And Unpacking; Packaging Contents; Handling And Unpacking The Inverter - Advanced Energy AE 75TX Installation And Operation Manual

Advanced Energy® AE ?STX and AE 100TX Inverters
Installing
HANDLING AND UNPACKING
This section describes the required safe handling and unpacking procedures for the
AE inve1ter. Always follow the recommendations in this section to prevent accidental
damage or injmy .
Packaging Contents
The following items are included with the inve1ter when it is packaged for shipping:
• Manual
• WaITanty card
• Final test repo1 t
• Keys for door handles
Handling and Unpacking the Inverter
TOOLS REQUIRED
• Two 9/16" wrenches or one wrench and one 9/16" socket wrench
• Lifting device such as a forklift or pallet jack
• Utility knife
The inve1ter can be moved using a forklift or pallet jack that is rated to handle a
minimmn of
1452
kg (3200 lb).
TO UNLOAD AND UNPACK THE INVERTER
LL
WARNING:
Heavy equipment. AE 7'5fX/AE 100TX units weigh up to 1452 kg (3200 lb)
with pallet and packaging. If the unit is lifted incorrectly, it may result in death.
In addition, improper handling may result in serious damage to the unit and
may also void the warranty. Keep all doors securely closed while moving the
unit. Only use lifting equipment that is rated for the weight of the unit. Only
use the specified lifting points.
570-1001793-0SB
Installing
4-1