Chapter 5. Operation; System Startup Procedure - Advanced Energy AE 600 User Manual

Operation

SYSTEM STARTUP PROCEDURE

WARNING:
Before turning on the inverter, ensure that the front panels are closed
properly.
AVERTISSEMENT:
Assurez-vous de la bonne fermeture des panneaux antérieurs avant de
mettre l'onduleur en route.
To Start the Inverter
1. Turn the ON/OFF switch to the OFF position.
The ON/OFF switch is located next to the display screen.
2. Open the door to the DC combiner sub panel.
3. Check the polarity of the DC positive and negative connectors to ensure they
are wired correctly.
4. Confirm the PV panel open circuit voltage is at or below 600 VDC.
5. Turn all DC breakers to the ON position.
6. Close all upper and lower cabinet doors.
7. Turn on the external AC connection to the inverter.
8. Turn on the external DC disconnect to provide DC power to the inverter.
9. Turn the inverter's AC disconnect (if equipped) to the power ON position.
570-1001791-05A
Advanced Energy® AE 500 Inverter
Pause/scroll button
On/Off button
4684
Operation
Chapter
5
5‑1