Advanced Energy AE 75TX Installation And Operation Manual page 125

Advanced Energy® AE ?STX and AE 1 OOTX Inverters
Temperature Faults
The following table lists the temperanire faults.
All temperanire faults may be resolved by:
• Cleaning all the filters
• Make sure air vents aren't blocked and sufficient space is provided around all
air vents.
If the filters
are clean and air flow is insufficient, contact AE Solar Energy Technical
Suppo1t.
Table 8-6.
Temperature (TMP) faults
Display Screen Display Screen Text Description
Hexadecimal
Value
0001
HEATSINK TEMP Al Module heat-sink Al temperanire high
0002
HEATSINK TEMP A2 Module heat-sink A2 temperanire high
0004
HEATSINK TEMP Bl Module heat-sink B
1
temperamre high
0008 HEATSINK TEMP B2
Module heat-sink B2 temperamre high
0010 HEATSINK TEMP Cl
Module heat-sink Cl temperamre high
0020 HEATSINK TEMP C2 Module heat-sink C2 temperamre high
0040 BOARD TEMP HI Control board temperanire high
0080 DRIVE TEMP LOW Drive temperamre low
0100
MAGNETICS TEMP ID Magnetics temperamre high
0200 AMBIENT TEMP LOW Ambient temperamre low
0400 MAG TEMP LOW Magnetics temperamre low
0800 IPM TEMPIDGH
IPM temperanire high
1000 INDUCTOR TEMP HIGH
Inductor temperamre high
System Faults
The following table lists the system faults.
Table 8-7. System (SYS) faults
Display Display Screen Text Description Action
Screen Hex
Value
0001 GROUND FAULT
Ground fault
CheckthePV
anay field wiling.
570-1001793-0SB Troubleshooting and Solar Energy Technical Support 8-11