Personal Safety; Medical And First Aid Treatment; Safety Equipment Requirements; Interpreting Product Labels - Advanced Energy AE 75TX Installation And Operation Manual

Advanced Energy®
AE ?STX and AE 1 OOTX
Inverters
PERSONAL SAFETY
Ensure that any personnel entering a safety zone within a four foot area around any
operating inve1ter wear appropriate Personal Protective Equipment (PPE) as
mandated by national, state, and local auth01ities.
Medical and First Aid Treatment
Personnel working in and around operating power generation equipment should be
trained in arc flash hazard, fire extinguisher selection and use, first aid, cardio
puhnonaiy resuscitation (CPR), and automated external defibrillator (AED) use when
each is applicable.
Safety Equipment Requirements
Authorized se1vice personnel perfonning operations on this unit should have the
following minimum safety equipment available:
• Consult NFPA ?OE, or applicable local standai·ds, for PPE requirements on
switch gear operating at less than 600 V
• Electrical hazard footweai· (ANSI Z41/Z85 rated)
• Lockout Tagout (LOTO) Kit
• Appropriate meter to verify the circuits ai·e safely de-energized (1000 V AC and
DC rated, minimum)
• Any other equipment as applicable to your operation as required by national,
state, and local regulations
INTERPRETING PRODUCT LABELS
The following labels may appeai· on your unit:
_)_
Eaith grOlmd
570-1001793-0SB Safety and Product Compliance Guidelines 1-3