Advanced Energy AE 75TX Installation And Operation Manual page 55

Advanced Energy® AE ?STX and AE 1 OOTX Inverters
TOOLS REQUIRED
• 5132" hex wrench
• NEMA 4 conduit hubs
• Knockout punch
TO USE THE GLAND PLATES
Important
All penetrations in the inve1ter cabinet must be through the gland plates which
provide a safe and convenient way to route wiring in to and out of the inve1ter.
Penetrating the inve1ter cabinet in any other location besides the gland plates
voids the wainnty.
1. Select the size( s) and location( s) of the hole( s) that need to be punched.
4346
Figure 4-8. DC bottom entry gland plates
Figure 4-9. DC side entry gland plates
2. Remove the gland plate, taking care not to damage the weatherproof gasket
matelial on the back side of the plate.
3. Punch holes as needed in the gland plate.
570-1001793-0SB
Installing 4-9