Connect The Input Module To The Cp String - Festo CPI-CL Series Manual

2. Input modules types CP−E08−M...−CL and CP−E16−KL−CL

2.3.2 Connect the input module to the CP string

2−12
Caution
Fault in data transfer on the CP string.
Note the maximum permitted string lengths in the manual
for the CP master used.
You will then avoid faults in data transfer between the
input module and the CP master (e. g. CP field bus node).
Caution
Functional damage
Note the maximum permitted string lengths in the manual
for the CP master used.
Use only the intended original cable type KVI−CP−... from Festo
for connecting the CPI/CP modules, see manual for the CP
master used.
Note
Specifications on the current consumption of the different
CPI/CP modules can be found in the relevant manuals.
The following functions are provided for the module via the
CP cable:
Operating voltage for internal electronics
Connection for data exchange
Operating voltage for the connected sensors
Festo P.BE−CPEA−CL−EN en 0711a