Table of Contents
Advertisement
Available languages
Available languages
Display control
20.7.5. Digital I/O
In this menu the digital inputs and outputs are configured.
The configuration options for the digital outputs are:
Options
NO CONFIGURATION
GENERATOR
LOW BAT. VOLTAGE
HIGH BAT. VOLTAGE
NON-CRITICAL LOADS
NEUTRAL GROUND
AC GRID CONTACTOR
BATTERY WAKE-UP
ON/OFF BY COMM.
The digital input options are:
Options
NO CONFIGURATION
START/STOP
AC CONTACTOR
20.7.6. Change time/date
Change the current time and date.
20.7.7. Change Modbus node
Change the unit's Modbus node number.
20.7.8. PV grounding
Configure the type of PV grounding used in the installation. The grounding is only possible in units with a
transformer.
20.7.9. Enter password
An installer password must be introduced in order to make changes in the unit's configuration. The password is
0332.
This password is reserved for installers and not end users. Ingeteam accepts no liability for incorrect
use of this password.
20.8. Language
Select the language in which you wish to view the display menus.
20.9. Further options
Emergency charge
Switch on the inverter for a brief period of time to charge the storage system.
Partial data reset
This allows the partial energy meters, partial connection time and number of partial connections to be reset.
ABH2013IQM01_A - Installation and Operation Manual
No configuration.
Auxiliary generator activation signal.
Storage system voltage below parameter set.
Storage system voltage above parameter set.
Connection / disconnection of non-crit. loads when there is no grid or auxiliary
generator.
Connection / disconnection of inverter neutral ground.
Opening / closing of an external AC contactor for connecting an inverter to the grid
or auxiliary generator.
Storage system manager activation signal.
Manual opening / closing via communications.
No configuration.
Start/Stop the inverter.
External AC contactor status reading.
Explanation
Explanation
Ingeteam
DE
EN
ES
FR
IT
PT
97
Advertisement
Chapters
Table of Contents
