Ingeteam Power Technology, S.A.
1.2.1. Functional diagram of the equipment
Ingecon
* resistors are not included with the equipment.
1.2.2. Options
For special applications, the Ingecon
24V. In addition to two potential free contacts that can be used as digital communication outputs or as a system to
activate the auxiliary braking systems or Pitch control system.
Optionally, it can access the Ingecon
control.
1.3. Compliance with standards and regulations
The Ingecon
μWind Interface models can be fitted with kits to adapt them to the standards and regulations in all
®
European countries and also those in force in other continents.
1.3.1. CE Marking
The CE marking is essential for marketing any product in the European Union, without prejudice to all applicable
standards and regulations. The Ingecon
following directives:
•
Low Voltage Directive 2006/95/EC
•
Electromagnetic Compatibility Directive 2004/108/EC
Low Voltage Directive
The Ingecon
μWind Interface models are sufficiently compliant with this directive by compliance with the applicable
®
parts of harmonised standard EN 50178 Electronic for use in power installations.
Electromagnetic Compatibility Directive
The Ingecon
μWind Interface models are sufficiently compliant with this directive by compliance with the applicable
®
parts of the following harmonised standards:
•
EN 61000-6-2 Electromagnetic Compatibility. Part 6-2: Generic Standards - Immunity for Industrial
Environments.
10
μWind Interface
®
interlock
contactors
rectifier
analog inputs
μWind Interface features two digital opto-isolated inputs for voltages of 0 ~
®
Manager software to monitor system configuration, variables, and remote
®
μWind Interface models bear the CE Marking through compliance with the
®
controller
communications
Installation manual
resistors*
AAY2000IKI06