U1 Belt - Epson LS10-B Series User Manual

Maintenance 8. Joint #4

8.2.2 U1 Belt

U1 belt (1) Remove the Joint #4 motor unit.
Removal
(2) Remove the Joint #4 intermediate shaft unit.
(3) Remove the U1 belt.
128
Follow the removal steps in Maintenance:
8.2.1 U2 Belt.
Refer to the removal steps in Maintenance: 8.2.1 U2 Belt.
Joint #4
Intermediate Shaft Unit
U1 belt
Joint #4
Motor Unit
3-M4×15
+Washer
3-M4×12
+Washer
LS10-B Rev.6