Checking The Timing Belt Tension (U1, U2 Belts) - Epson LS10-B Series User Manual

8.4 Checking the Timing Belt Tension (U1, U2 Belts)

Name
Tool Sonic tension meter
Joint #4 (1) Enter appropriate setting values to the sonic tension meter.
Belt tension
check
(2) Strum the belt and measure tension.
Measurement failure may occur if the microphone
NOTE

touches the belt during measurement.
LS10-B Rev.6
Qty.
For details of usage and measurement methods of the tension
1
meter, refer to the instruction manual of the tension meter.
Unit mass M
Belt [g/ (1 mm width ×1 m
length)]
U1 belt
U2 belt
Note
Width W
[mm]
2.5 10
2.5 21
Maintenance 8. Joint #4
Span S
[mm]
70
250
135