Epson LS10-B Series User Manual page 116

Maintenance 7. Joint #3
(8) Loosen the bolts for the Joint #3 motor unit.
(9) Remove the Joint #3 motor from the Joint
#3 motor unit.
(10) Loosen the screws of the pulley remove it
from the Joint #3 motor.
There is a brass bushing in one of the set
screw holes.
bushing.
104
Be sure to keep the
Joint #3
Motor Unit
3-M4×18 + Washer
4-M4×15
+Washer
Joint #3 Motor
M5×8
Set screw
+ M5 Bushing
Joint #3 Motor
M5×8
Set Screw
Pulley
LS10-B Rev.6