Specifications; Features Of Ls10-B Series Manipulators - Epson LS10-B Series User Manual

Setup & Operation 2. Specifications

2. Specifications

2.1 Features of LS10-B series Manipulators

The LS10-B series Manipulators are advanced manipulators pursuing high speed and high
cost-performance. The features of the LS10-B series Manipulators are as follows:
Large capacity
Tact time improvement by high-speed motion
Ethernet connector for camera cable is equipped by default
Simplify the connection and disconnection of M/C cable
14
It supports the U-axis allowable moment up to 0.30 kg·m
Handle large loads stably by optimized control based on the each load.
It improves the tact time of long-range movements by readjusting the highest speed.
It improves the tact time of delicate movements by acceleration/deceleration speed
optimized for each payload and stop short technology.
Ethernet connector is equipped on #2 arm and base of the manipulator by default.
Easier to equip a camera (option: Vision Guide) than the conventional models.
Connect the M/C cable and the cable inside the manipulator with the connector.
Easy to connect and disconnect the M/C cable and easier to transport the manipulator
than the conventional models.
.
2
LS10-B Rev.6