Epson LS10-B Series User Manual page 99

(7) Remove the waveform generator from the Joint
(8) Remove the motor mounting screws to remove
LS10-B Rev.6
#1 motor.
There is a brass bushing in one of the set screw
holes. Be careful not to lose the bushing.
A: Brass Bushing : M5
B: Set Screw : 2-M5×6
the motor flange and O-ring (CO0538A).
Maintenance 5. Joint #1
Waveform Generator
A: Brass Bushing
B: Set Screw
Joint #1 Motor
Motor Flange
O-ring
Joint #1 Motor
4-M4 washer
4-M4×12
87