Introduction; Purpose Of This Guide; Additional Resources - Danfoss VLT FC Series Service Manual

Introduction

1 Introduction

1.1 Purpose of This Guide

This guide provides service information for the following
drives and drive modules:
•
D1h–D8h drives.
•
E1h–E4 drives.
•
J8–J9 drives.
•
®
VLT Parallel Drive Modules.
•
Da2/Db2/Da4/Db4 parallel drive systems and VLT
Parallel Drive Modules.
•
Drive modules within D9h–D10h/E5h–E6h
enclosed drive systems. The drive modules within
these enclosed drive systems are based on D3h–
D4h and E3h–E4h drives.
It is intended to be used by authorized technicians to
identify faults and perform repairs.
The guide includes the following information:
•
Data for the different enclosure sizes.
•
Description of user interfaces and internal
processing.
•
Troubleshooting and test instructions.
•
Disassembly and reassembly instructions.
®
VLT is a registered trademark.
MG94A502
Service Guide

1.2 Additional Resources

Additional resources are available to understand advanced
drive functions and programming.
•
®
•
•
•
•
•
•
•
Danfoss A/S © 02/2019 All rights reserved.
The Service Guide for Enclosures D9h–D10h and
E5h–E6h provides additional information for
servicing D9h–D10h and E5h–E6h enclosed drive
systems. (However, the drive modules within
these enclosed drive systems are based on D3h–
D4h and E3h–E4h drives, which are documented
in the current manual.)
®
The VLT Parallel Drive Modules Installation Guide
provides information required for mechanical and
electrical installation of the VLT
Modules.
®
The VLT Parallel Drive Modules User Guide
provides detailed information for start-up and
commissioning of parallel drive systems
®
composed of VLT Parallel Drive Modules.
The product-specific programming guide provides
greater detail on working with parameters and
shows many application examples.
The product-specific design guide provides
detailed capabilities and functionality to design
systems using Danfoss drives.
The product-specific operating guide provides
information required to install and commission
Danfoss drives.
The product-specific kit instructions provide
information on installation of various options
available for Danfoss drives.
Technical documentation for other product
options is available at drives.danfoss.com/
knowledge-center/technical-documentation/.
1
®
Parallel Drive
9
1