9.1 Configuration options
The most frequently used configurations with the RF-series data logger and RF-series radio
include the following:
See also
RF radio option specifications
9.2 RF407-Series radio communications with
one or more data loggers
To configure an RF407-series radio to communicate with the data logger, you must complete the
following steps (instruction follows):
Ensure your data logger and RF407-series radio are connected to an antenna and power.
l
Configure the connection to the RF407-series device using Device Configuration Utility.
l
If you are connecting to multiple data loggers, you will have to assign unique PakBus
l
addresses to each data logger using Device Configuration Utility. (Connect to each data
logger, set the PakBus Address on the Deployment | Datalogger tab.)
Use data logger support software to set up communications between the RF407-series
l
radio and the data loggers.
(p. 194).
9. Radio communications option
43