Timestamp; Varoutofbound; Watchdogerrors; Wifiupdatereq - Campbell CR300 Series Product Manual

18.2.39 TimeStamp

Scan-time that a record was generated.
NSEC data type
l

18.2.40 VarOutOfBound

Number of attempts to write to an array outside of the declared size. The write does not occur.
Indicates a CRBasic program error. If an array is used in a loop or expression, the pre-compiler
and compiler do not check to see if an array is accessed out-of-bounds (i.e., accessing an array
with a variable index such as arr(index) = arr(index–1), where index is a variable). Updated at
runtime when the error occurs. Enter 0 to reset.

18.2.41 WatchdogErrors

Number of watchdog errors that have occurred while running this program. Resets automatically
when a new program is compiled. Enter 0 to reset. Updated at startup and at occurrence.

18.2.42 WiFiUpdateReq

Shows if WiFi operating system update is available. Update available (true) or not (false).
Updates when state changes.
Boolean data type
l

18.3 Settings

Settings can be accessed from the LoggerNet Connect Screen Datalogger > Setting Editor, or
using Device Configuration Utility Settings Editor tab. Settings are organized in tabs and can be
searched for.
Most Settings are read/write and of a numeric data type unless noted.
Settings may be accessed programatically using
syntax. For example: Variable = Settings.Fieldname. For more information
see: https://www.campbellsci.com/blog/programmatically-access-stored-data-values.
SetSetting() or Tablename.Fieldname
18. Information tables and settings (advanced) 158