Campbell CR300 Series Product Manual page 238

output processing instructions
CRBasic instructions that process data values for eventual output to final-data memory.
Examples of output-processing instructions include Totalize(), Maximum(), Minimum(),
and Average(). Data sources for these instructions are values or strings in variable
memory. The results of intermediate calculations are stored in data output processing
memory to await the output trigger. The ultimate destination of data generated by data
output processing instructions is usually final-data memory, but the CRBasic program can
be written to divert to variable memory for further processing. The transfer of processed
summaries to final-data memory takes place when the Trigger argument in the DataTable
() instruction is set to True.
output processing memory
SRAM memory automatically allocated for intermediate calculations performed by
CRBasic data output processing instructions. Data output processing memory cannot be
monitored.
P
PakBus
® A proprietary communication protocol developed by Campbell Scientific to facilitate
communications between Campbell Scientific devices. Similar in concept to IP (Internet
Protocol), PakBus is a packet-switched network protocol with routing capabilities. A
registered trademark of Campbell Scientific, Inc.
PakBus Graph
Software that shows the relationship of various nodes in a PakBus network and allows for
monitoring and adjustment of some registers in each node.
parameter
Part of a procedure (or command) definition.
PC200W
Basic data logger support software for direct connect. It supports a connection between
computer and data logger and includes Short Cut for creating data logger programs.
Appendix C. Glossary 225