Campbell CR300 Series Product Manual page 250

throughput rate
Rate that a measurement can be taken, scaled to engineering units, and the stored in a
final-memory data table. The data logger has the ability to scan sensors at a rate exceed-
ing the throughput rate. The primary factor determining throughput rate is the pro-
cessing programmed into the CRBasic program. In sequential-mode operation, all
processing called for by an instruction must be completed before moving on to the next
instruction.
time domain
Time domain describes data graphed on an X-Y plot with time on the X axis. Time series
data is in the time domain.
TLS
Transport Layer Security. An Internet communication security protocol.
toggle
To reverse the current power state.
TTL
Transistor-to-Transistor Logic. A serial protocol using 0 VDC and 5 VDC as logic signal
levels.
Tx
Transmit
U
UART
Universal Asynchronous Receiver/Transmitter for asynchronous serial communications.
UINT2
Data type used for efficient storage of totalized pulse counts, port status (status of 16
ports stored in one variable, for example) or integer values that store binary flags.
Appendix C. Glossary 237