Campbell CR300 Series Product Manual page 33

6. Retrieve your IP Address. On the bottom, left side of the screen, select Use IP Connection,
then click the browse button next to the Communication Port box. Note the IP Address
(default is 192.168.66.1). If you have multiple data loggers in your network, more than one
data logger may be returned. Ensure you select the correct data logger by verifying the
data logger serial number or station name (if assigned).
7. A virtual IP address can be used to connect to the data logger using Device Configuration
Utility or other computer software, or to view the data logger internal web page in a
browser. To view the web page, open a browser and enter
address you retrieved in the previous step (for example, 192.168.66.1) into the address bar.
To secure your data logger from others who have access to your network, we recommend that
you set security. For more information, see
NOTE:
Ethernet over USB (RNDIS) is considered a direct communications connection. Therefore, it is
a trusted connection and csipasswd does not apply.
Data logger security
www.linktodevice.com
(p. 104).
5. Virtual Ethernet over USB (RNDIS)
or the IP
20