Cellapn; Cellenabled; Cellinfo; Cellkeepalive - Campbell CR300 Series Product Manual

18.3.57.1 CellAPN

Specifies the APN, and is required. The APN is the gateway between the cell network and the
internet. APN must be obtained from your cellular network provider.
String data type
l
Where to find:
Settings Editor tab in Device Configuration Utility: Cellular > APN
l

18.3.57.2 CellEnabled

Global control for cell modem. This overrides the power schedule setting and CRBasic
IPNetpower instruction. 0 Disabled, 1 or <>0 Enabled.
Boolean data type
l
Where to find:
Settings Editor tab in Device Configuration Utility: Cellular > Cell Modem Enable
l

18.3.57.3 CellInfo

Cellular network/state information. Reports the cellular IP address, default gateway, DNS,
network state, cell carrier, connection type, phone number associated with the SIM card, and
data usage.
String data type
l
Read only
l
Where to find:
Settings Editor tab in Device Configuration Utility: Cellular > Diagnostic Info
l

18.3.57.4 CellKeepAlive

URL for ping to verify network connectivity. This is only sent if there has been no network activity
within the CellKeepAliveTime setting. If there is no ping response, the network connection is re-
established. To disable keep alive pings, leave this setting blank.
String data type
l
Where to find:
Settings Editor tab in Device Configuration Utility: Cellular > Ping Keep Alive URL
l
18. Information tables and settings (advanced) 169