Wi-Fi Communications Option; Configuring The Data Logger To Host A Wi-Fi Network - Campbell CR300 Series Product Manual

7. Wi-Fi communications option

By default, the CR300 series-WIFI is configured to host a Wi-Fi network. The LoggerLink mobile
app for iOS and Android can be used to connect with a CR300 series-WIFI. Up to eight devices
can connect to a network created by a CR300 series. The setup follows the same steps shown in
this video: CR6-WIFI Datalogger - Setting Up a Network
NOTE:
The user is responsible for emissions if changing the antenna type or increasing the gain.
See also Communications specifications
7.1 Configuring the data logger to host a
Wi-Fi network
By default, the CR300-WIFI is configured to host a Wi-Fi network. If the settings have changed,
you can follow these instructions to reconfigure it.
1. Ensure your CR300-WIFI is connected to an antenna and power.
2. Using Device Configuration Utility, connect to the data logger.
3. On the Deployment tab, click the Wi-Fi sub-tab.
4. In the Configuration list, select the Create a Network option.
5. Optionally, set security on the network to prevent unauthorized access by typing a
password in the Password box (recommended).
6. Apply your changes.
.
(p. 193).
7. Wi-Fi communications option 25