Campbell CR300 Series Product Manual page 219

C
calibration wizard
The calibration wizard facilitates the use of the CRBasic field calibration instructions
FieldCal() and FieldCalStrain(). It is found in LoggerNet (4.0 and later) or RTDAQ.
callback
A name given to the process by which the data logger initiates communications with a
computer running appropriate Campbell Scientific data logger support software. Also
known as "Initiate Comms."
CardConvert software
A utility to retrieve binary final data from memory cards and convert the data to ASCII or
other formats.
CDM/CPI
CPI is a proprietary interface for communications between Campbell Scientific data log-
gers and Campbell Scientific CDM peripheral devices. It consists of a physical layer defin-
ition and a data protocol.
CF
CompactFlash®
code
A CRBasic program, or a portion of a program.
Collect button
Button or command in data logger support software that facilitates collection-on-
demand of final-data memory. This feature is found in PC200W, PC400, LoggerNet, and
RTDAQ software.
Appendix C. Glossary 206