Installation; Modules Using Konect Pakbus Router (Private Dynamic Ip); Configure Data Logger - Campbell CR300 Series Product Manual

8.2 Installation

8.2.1 Modules using Konect PakBus Router (private dynamic IP)

8.2.2 Modules using a public static IP
8.2.1 Modules using Konect PakBus Router (private
dynamic IP)

8.2.1.1 Configure data logger

8.2.1.2 Set up LoggerNet
8.2.1.3 Test the connection
8.2.1.1 Configure data logger
1. Connect the cellular antenna, if it is not already connected. When using a MIMO antenna
with multiple cellular connections, connect the primary cable to Cellular and the secondary
to Diversity. If the cables are not marked in this way, they can be connected to either
antennna port.
2. Connect to your data logger by using Device Configuration Utility.
33
37
33
35
37
8. Cellular communications option 33