Appendix A. Configure Cellular Settings And Retrieve Status Information With Setsetting() - Campbell CR300 Series Product Manual

Appendix A. Configure cellular
settings and retrieve status
information with SetSetting()
This example shows how to set up the cellular module using the
also illustrates how to retrieve status information from the module in the CRBasic program. This
program can be downloaded from
https://s.campbellsci.com.au/documents/us/miscellaneous/CELL2XX-SetSettings.dld.
CRBasic Example 3: Settings configuration and status retrieval
'CR300 Series
Public
battery_voltage
Public
panel_temperature_c
'cell modem diagnostic information
Public
cell_todays_usage
Public
cell_yesterdays_usage :
Public
cell_this_months_usage :
Public
cell_last_months_usage :
Public
cell_rssi
Public
cell_info
Public
cell_ip_address
Public
cell_rsrp
Public
cell_rsrq
Public
cell_ecio
Public cell_status
Public cell_state
DataTable (CELL_DIAGNOSTICS, True, -1)
Sample (1, cell_todays_usage, FP2) 'or
Sample (1, Settings.CellUsageToday, FP2)
Sample (1, cell_yesterdays_usage, FP2)
Sample (1, Settings.CellUsageYesterday, FP2)
Sample (1, cell_this_months_usage, FP2)
Sample (1, Settings.CellUsageMonth, FP2)
Sample (1, cell_last_months_usage, FP2)
Sample (1, Settings.CellUsageLastMonth, FP2)
Sample (1, cell_rssi, IEEE4)
Units
:
Units
Units
Units
As Long Units
:
As String
* 400
As String
* 40
As Long
As String * 300
As String * 100
'or

Appendix A. Configure cellular settings and retrieve status information with SetSetting()

SetSetting()
cell_todays_usage = KB
cell_yesterdays_usage = KB
cell_this_months_usage = KB
cell_last_months_usage = KB
cell_rssi = DB
'or
'or
'or
instruction. It
197