Rf407-Series Radio Settings; Radioavailfreq; Radiochanmask; Radioenable - Campbell CR300 Series Product Manual

String data type
l
Read only
l
Where to find:
Settings Editor tab in Device Configuration Utility: Cellular > Cell Diagnostic Info
l

18.3.58 RF407-series radio settings

Access RF407-series radio settings, using Device Configuration Utility. Clicking on a setting in
Device Configuration Utility also provides information about that setting. These settings are
available for RF407-series dataloggers.
NOTE:
A list of Settings fieldnames is also available from the data logger terminal mode using
command F.

18.3.58.1 RadioAvailFreq

Displays the bitfield of the frequencies that are available in the module's region of operation.
String data type
l
Read only
l
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > Available Frequencies
l

18.3.58.2 RadioChanMask

The channel mask allows channels to be selectively enabled or disabled. This allows you to avoid
using frequencies that experience unacceptable levels of RF interference.
String data type
l
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > Radio Channel Mask
l

18.3.58.3 RadioEnable

Global control for the internal radio module.
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > Radio Enable
l
18. Information tables and settings (advanced) 174