Cellstate; Cellstatus - Campbell CR300 Series Product Manual

Where to find:
Settings Editor tab in Device Configuration Utility: Cellular > Signal Strength
l

18.3.57.14 CellState

Specifies the current communications state with the cell modem and the network. The following
states are available:
Power off
l
Powering up
l
Powered up
l
SIM authorized
l
Setting baud rate
l
Waiting for baud rate
l
Baud rate set
l
Baud rate failure
l
Power off. Waiting for retry
l
Powered up. SIM auth failure
l
Querying modem
l
Waiting for network registration
l
Configuring modem
l
Dialing
l
Dialing (retry)
l
Dialed
l
PPP negotiation
l
Network ready
l
PPP closing
l
PPP paused
l
PPP dropped
l
Terminal AT command mode
l
Firmware update mode
l
Shutting down
l
String data type
l
Read only
l
Where to find:
Settings Editor tab in Device Configuration Utility: Cellular > Cellular State
l

18.3.57.15 CellStatus

Cellular diagnostic information. Reports the PPP state, IMEI, IMSI, and ICCID for the data logger.
18. Information tables and settings (advanced) 173