Radiorssiaddr; Radiostats - Campbell CR300 Series Product Manual

Determining the optimal direction to aim a Yagi antenna.
l
Determining the effects of antenna height and location.
l
Trying alternate (reflective) paths.
l
Seeing the effect of vegetation and weather over time.
l
Long data type
l
Read only
l
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > RFSignalLevel (first number)
l

18.3.58.13 RadioRSSIAddr

Indicates the PakBus address of the RadioRSSI signal radio.
Long data type
l
Read only
l
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > RFSignalLevel (second number)
l

18.3.58.14 RadioStats

Provides the performance statistics for the integrated radio for the data logger. The data logger
will maintain a radio routing table for each PakBus neighbor accessed using the integrated radio
and this setting is generated from that table. The fields reported for this setting are as follows:
PakBus Address: Specifies the PakBus address of the neighbor reached through an
l
integrated radio link.
Sent Packets: Reports the number of radio packets that have been transmitted to the
l
PakBus neighbor using the integrated radio link.
Received Packets: Reports the number of radio packets that have been received from the
l
PakBus neighbor using the integrated radio link.
Packet Retries: Reports the number of radio packet transmissions to the PakBus neighbor
l
using the integrated radio link that had to be retransmitted by the radio module.
Packet Failures: Reports the number of radio packet transmissions to the PakBus neighbor
l
that were never acknowledged.
String data type
l
Where to find:
Settings Editor tab in Device Configuration Utility: Radio > Radio Performance Statistics
l
18. Information tables and settings (advanced) 178