Ftppassword; Ftpport; Ftpusername; Httpenabled - Campbell CR300 Series Product Manual

18.3.11 FTPPassword

Specifies the password that is used to log in to the FTP server.
String data type
l

18.3.12 FTPPort

Configures the TCP port on which the FTP service is offered. The default value is usually sufficient
unless a different value needs to be specified to accommodate port mapping rules in a network
address translation firewall. Default = 21.

18.3.13 FTPUserName

Specifies the user name that is used to log in to the FTP server. An empty string (the default)
inactivates the FTP server.
String data type
l

18.3.14 HTTPEnabled

Specifies additions to the HTTP header in the web service response. It can include multiple lines.
Set to 1 to enable HTTP (web server) service or 0 to disable it.

18.3.15 HTTPPort

Configures the TCP port on which the HTTP (web server) service is offered. Generally, the default
value is sufficient unless a different value needs to be specified to accommodate port-mapping
rules in a network-address translation firewall. Default = 80.

18.3.16 HTTPSEnabled

Set to 1 to enable the HTTPS (secure web server) service.

18.3.17 HTTPSPort

Configures the TCP port on which the HTTPS (encrypted web server) service is offered. Generally,
the default value is sufficient unless a different value needs to be specified to accommodate port
mapping rules in a network address translation firewall.

18.3.18 IncludeFile

This setting specifies the name of a file to be implicitly included at the end of the current CRBasic
program or can be run as the default program. In order to work as an include file, the file
18. Information tables and settings (advanced) 161