7.2 Connecting your computer to the data
logger over Wi-Fi
1. Open the Wi-Fi network settings on your computer.
2. Select the Wi-Fi-network hosted by the data logger. The default name is CR300 followed
by the serial number of the data logger. In the previous image, the Wi-Fi network is CRxxx.
3. If you set a password, select the Connect Using a Security Key option (instead of a PIN) and
type the password you chose.
4. Connect to this network.
7.3 Setting up Wi-Fi communications
between the data logger and the data
logger support software
1. Using LoggerNet or PC400, click Add Datalogger
LoggerNet users, you must first click Setup
(Simplified) view, then click Add Datalogger
NOTE:
PC200W does not support IP connections.
to launch the EZSetup Wizard. For
, then View menu to ensure you are in the EZ
.
7. Wi-Fi communications option
26