Collect Data; Collect Data With Pc200W Or Pc400 - Campbell CR300 Series Operator's Manual

Sending a program this way erases
all data tables saved on the CR300.
Ensure that all critical data have
been collected. If not, click No, and
collect data before attempting to
send the new program.
Click Yes to confirm that data deletion is OK and to send the program to the CR300.
After the program has successfully
been sent to and compiled by the
CR300, a Compile Results window
opens. Click OK.
After sending a program, it is a good idea to monitor the data to make sure it is measuring as you expect. Follow
the steps outlined in Section 5.6, Monitoring Data
4.6

Collect Data

4.6.1 Collect Data with PC200W or PC400

Select the CR300.
Click Connect.
.
(p. 23)
After giving the datalogger sufficient time to take multiple measurements,
collect and review the data.
CR300-Series Datalogger
15