[Uky1] [Uky2] [Uky3] User Key Assignment (143, 144, 145) - Fuji Electric Micro-Controller X Socket type Operation Manual

Parameter functions and setting procedure
UKy3 USER key assignment (143, 144, 145)
UKy1 UKy2
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
Allows you to assign a function to the
Parameter
UKy1 (USER) key
UKy2 (USER) key and
UKy3 (USER) key and
Select a function from the table below.
●
Setpoint
0 No function
1 Switchover between STBY ON/OFF
Switchover between Auto/Manual
2
3 Unavailable
4 Unavailable
Starts AT (Auto-tuning) (standard)
5
6 Starts AT (Auto-tuning) (low PV)
[Setting example] Assigning the standby on/off switching function to the USER key ––
Display
1.
2.
3.
4.
5.
6.
(USER) key.
Key assignment
key
key
Function
Press and hold the key for about five seconds during the SV/PV display.
appears.
➔ ➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the key to change " 0 " to " 1 ."
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Setting
range
0 to 6
Operating procedure
.
70