Table of Contents
Advertisement
3
Parameter functions and setting procedure
3-1 1st block parameter
MANU Manual mode selection (001)
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
Allows you to select how to set the manipulated variable, automatically or manually.
Setpoint
oFF
oN
MANU indicator lights during manual operation. (see page 11)
●
In this screen, only the switchover between auto/manual is available. Manual operation of control output is
●
available on PV/MV screen.
This parameter is not displayed in default setting. To use this parameter, change the
setting of the parameter "Parameter mask" (see page 68).
[Setting example] Changing the mode from Auto to Manual –––––––––––––––––
Display
1.
2.
3.
4.
5.
Description
Automatically
Manually
Press and hold the
key for about one second during the SV/PV display.
appears.
➔
➔
Press the
key.
➔The setpoint starts blinking.
➔
keys to change " oFF " to " oN ."
Press the
or
Press the
key or wait for three seconds to save the change.
Press the
key.
➔The screen returns to the SV/PV display.
➔
Operating procedure
20
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Micro-Controller X Socket type and is the answer not in the manual?