Download
Share
Print this page
Fuji Electric PXH Series Manual
  1. Manuals
  2. Brands
  3. Fuji Electric Manuals
  4. Temperature Controller
  5. PXH Series
  6. Manual
Fuji Electric PXH Series Manual

Fuji Electric PXH Series Manual

Modbus sio driver
Hide thumbs

Advertisement

Quick Links

Temperature Controller
MODBUS SIO Driver
1
System Configuration....................................................................................................... 3
2
External Device Selection ................................................................................................ 8
3
Communication Settings .................................................................................................. 9
4
Setup Items .................................................................................................................... 25
5
Cable Diagrams ............................................................................................................. 30
6
Supported Devices......................................................................................................... 71
7
Device Code and Address Code.................................................................................... 76
8
Error Messages.............................................................................................................. 77
1
Fuji Electric Co.,Ltd.

Advertisement

loading

Related Manuals for Fuji Electric PXH Series

Summary of Contents for Fuji Electric PXH Series

  • Page 1: Table Of Contents

    Fuji Electric Co.,Ltd. Temperature Controller MODBUS SIO Driver System Configuration....................... 3 External Device Selection ....................8 Communication Settings ....................9 Setup Items ........................25 Cable Diagrams ......................30 Supported Devices......................71 Device Code and Address Code..................76 Error Messages......................77...
  • Page 2 Temperature Controller MODBUS SIO Driver Introduction This manual describes how to connect the Display and the External Device (target Temp. Controller). In this manual, the connection procedure is described in the sections identified below: System Configuration "1 System Configuration" (page 3) This section lists the types of External Devices and SIO that you can connect.

  • Page 3: System Configuration

    Temperature Controller MODBUS SIO Driver System Configuration The following table lists system configurations for connecting Fuji Electric Co.,Ltd. External Devices and the Display. Cable Series Link I/F SIO Type Setting Example Diagram " Cable PC Loader Port "Setting Example 1"...
  • Page 4 Temperature Controller MODBUS SIO Driver Connection Configuration • 1:1 Connection External Device Display • 1:n Connection External Device External Device External Device Maximum number of External Devices: 16 Display GP-Pro EX Device/PLC Connection Manual...
  • Page 5 Temperature Controller MODBUS SIO Driver IPC COM Port When connecting IPC with an External Device, the COM port used depends on the series and SIO type. Please refer to the IPC manual for details. Usable port Usable Port Series RS-232C RS-422/485(4 wire) RS-422/485(2 wire) COM1...
  • Page 6 Temperature Controller MODBUS SIO Driver When setting up communication between an External Device and the RS-232C/422/485 interface module, use the IPC (RS-232C) or PS5000 (RS-422/485) cable diagrams. However, when using PFXZPBMPR42P2 in a RS-422/485 (4-wire) configuration with no flow control, connect 7.RTS+ and 8.CTS+, and connect 6.RTS- and 9.CTS-.
  • Page 7 Temperature Controller MODBUS SIO Driver RS-422/485 (4 wire) DIP Switch Setting Description Reserved (always OFF) SIO type: RS-422/485 Output mode of SD (TXD) data: Always output Terminal resistance (220Ω) insertion to SD (TXD): None Terminal resistance (220Ω) insertion to RD (RXD): None Short-circuit of SDA (TXA) and RDA (RXA): Not available Short-circuit of SDB (TXB) and RDB (RXB): Not available RS (RTS) Auto control mode: Disabled...

  • Page 8: External Device Selection

    Enter an integer from 1 to 4 to define the number of Devices/PLCs to connect to the Number of Devices/PLCs display. Select the manufacturer of the External Device to connect. Select "Fuji Electric Manufacturer Co.,Ltd.". Select the External Device model (series) and the connection method. Select "Temp.

  • Page 9: Communication Settings

    Temperature Controller MODBUS SIO Driver Communication Settings This section provides examples of communication settings recommended by Pro-face for the Display and the External Device. Setting Example 1 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings]...
  • Page 10 Temperature Controller MODBUS SIO Driver External Device Settings For External Device communication settings, use the SEL key, UP key, DOWN key, Digit selection key, or DISP key located in the operation area on the front of the controller. Refer to your External Device manual for details. Press SEL key.
  • Page 11 Temperature Controller MODBUS SIO Driver Setting Example 2 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 12 Temperature Controller MODBUS SIO Driver External Device Settings For External Device communication settings, use the SEL key, UP key, DOWN key, Digit selection key, or DISP key located in the operation area on the front of the controller. Refer to your External Device manual for details. Press SEL key.
  • Page 13 Temperature Controller MODBUS SIO Driver Setting Example 3 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 14 Temperature Controller MODBUS SIO Driver External Device Settings External Device communication settings are fixed as indicated below. Setting Items Setting Value Communication speed 9600 Data length Stop bit Parity None GP-Pro EX Device/PLC Connection Manual...
  • Page 15 Temperature Controller MODBUS SIO Driver Setting Example 4 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 16 Temperature Controller MODBUS SIO Driver External Device Settings For External Device communication settings, use the SEL key, UP key, DOWN key, or USER key, located in the operation area on the front of the controller. Refer to your External Device manual for details. Press and hold SEL key to switch to Monitor Mode.
  • Page 17 Temperature Controller MODBUS SIO Driver Setting Example 5 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 18 Temperature Controller MODBUS SIO Driver External Device Settings For External Device communication settings, use the SEL key, UP key, or DOWN key located in the operation area on the front of the controller. Refer to your External Device manual for details. Press and hold SEL key to display the 3rd block parameter.
  • Page 19 Temperature Controller MODBUS SIO Driver Setting Example 6 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 20 Temperature Controller MODBUS SIO Driver External Device Settings For External Device communication settings, use the SEL key, UP key, or DOWN key located in the operation area on the front of the controller. Refer to your External Device manual for details. Press and hold SEL key to display the 3rd block parameter.
  • Page 21 Temperature Controller MODBUS SIO Driver Setting Example 7 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 22 Temperature Controller MODBUS SIO Driver External Device Settings For External Device communication settings, use the Station No. Configuration switch on the front of the controller. Refer to your External Device manual for details. Set "0" to Station No. Configuration switch. •...
  • Page 23 Temperature Controller MODBUS SIO Driver Setting Example 8 GP-Pro EX Settings Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 24 Temperature Controller MODBUS SIO Driver External Device Settings For External Device communication settings, use the Station No. Configuration switch on the front of the controller and Parameter Loader software (PUM Loader). Refer to your External Device manual for details. Set "0" to Station No. Configuration switch. •...

  • Page 25: Setup Items

    Temperature Controller MODBUS SIO Driver Setup Items Set up the Display’s communication settings in GP Pro-EX or in the Display’s off-line mode. The setting of each parameter must match that of the External Device. "3 Communication Settings" (page 9) Setup Items in GP Pro-EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
  • Page 26 Temperature Controller MODBUS SIO Driver Setup Items Setup Description Select the communication control method to prevent overflow of transmission and Flow Control reception data. Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the Timeout response from the External Device.
  • Page 27 Temperature Controller MODBUS SIO Driver Setup Items in Off-line Mode • Refer to the Maintenance/Troubleshooting manual for information on how to enter off-line mode or about the operation. Cf. Maintenance/Troubleshooting Manual "Off-line Mode" • The number of the setup items to be displayed for 1 page in the off-line mode depends on the Display in use.
  • Page 28 Temperature Controller MODBUS SIO Driver Setup Items Setup Description Select the communication control method to prevent overflow of transmission and reception Flow Control data. Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the Timeout response from the External Device.
  • Page 29 Temperature Controller MODBUS SIO Driver Option To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the External Device you want to set from the displayed list, and touch [Option]. Setup Items Setup Description You can switch RI/VCC of the 9th pin when you select RS232C for SIO type. RI/VCC It is necessary to change RI/5V by changeover switch of IPC when connect with IPC.

  • Page 30: Cable Diagrams

    Temperature Controller MODBUS SIO Driver Cable Diagrams The following cable diagrams may be different from cable diagrams recommended by Fuji Electric Co.,Ltd. Please be assured there is no operational problem in applying the cable diagrams shown in this manual. •...
  • Page 31 Temperature Controller MODBUS SIO Driver Display side External Device side Display φ2.5 triple pole miniature jack D-Sub 9pin Loader connecting cable • Connect the loader connecting cable to the PC loader port of the External Device. Display side External Device side Terminal block Shield D-sub 9 pin (plug)
  • Page 32 Temperature Controller MODBUS SIO Driver Cable Diagram 2 Display Cable Notes (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 GP3000 (COM1) AGP-3302B (COM2) Terminal block conversion adapter by Pro-face GP-4*01TM (COM1) Cable length: CA3-ADPTRM-01 GP-Rear Module (COM1) 500m or less (COM2) User-created cable LT3000 (COM1)
  • Page 33 Temperature Controller MODBUS SIO Driver All GP3000 models except GP-3200 series and AGP-3302B Only the COM port which can communicate by RS-422/485 (2 wire) can be used. (Except PE-4000B, PS5000) " IPC COM Port" (page 5) Except GP-4203T All GP4000 models except GP-4100 Series, GP-4*01TM, GP-Rear Module, GP-4201T and GP-4*03T Except SP-5B00 When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block Conversion Adapter, refer to Cable Diagram 2A.
  • Page 34 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Termination Display TERMRX Signal name resistance 100Ω CA3-ADPTRM-01 CA3-ADPCOM-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield Signal name...
  • Page 35 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Shield Signal name Signal name resistance resistance 100Ω 100Ω Display Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (socket) Terminal Block Terminal Block...
  • Page 36 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Signal name Terminal Block Shield Termination Display TERMRX Signal name resistance 100Ω CA3-ADPTRM-01 CA4-ADPONL-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Signal name Terminal Block...
  • Page 37 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side D-Sub 9pin (plug) External Device side Shield Signal name Terminal Block Termination Display Signal name TERMRX resistance 100Ω CA4-ADPONL-01 Shell User-created cable • 1:n Connection Display side D-Sub 9pin (plug) External Device side External Device side Signal name...
  • Page 38 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Termination Display TERMRX Signal name resistance 100Ω CA3-ADPTRM-01 CA3-ADPCOM-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield Signal name...
  • Page 39 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Shield Signal name Signal name resistance resistance 100Ω 100Ω DATA+ Display DATA- GND(SG) Shell • 1:n Connection Display side External Device side External Device side Terminal Block D-Sub 9pin (socket)
  • Page 40 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side Terminal block Terminal Block Termination Termination Shield Signal name Signal name resistance resistance*1 100Ω Display • 1:n Connection Display side External Device side External Device side Terminal block Terminal Block Terminal Block Termination...
  • Page 41 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (plug) Terminal Block Termination Termination Shield Signal name Signal name resistance resistance 100Ω 100Ω LINE(+) Display LINE(-) GND(SG) RS(RTS) Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (plug)
  • Page 42 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Termination Display TERMRX Signal name resistance 100Ω PFXZCBADTM1 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield Signal name...
  • Page 43 Temperature Controller MODBUS SIO Driver • 1:1 Connection External Device side Terminal Block Termination Signal name resistance Display 100Ω • 1:n Connection External Device side External Device side Termination Terminal Block Terminal Block resistance Termination 220Ω(1/4W) Shield resistance Signal name Signal name Display 220Ω(1/4W)
  • Page 44 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Shield Signal name Signal name resistance resistance 100Ω 100Ω DATA+ Display DATA- Shell • 1:n Connection External Device side Display side External Device side Terminal Block D-Sub 9pin (socket)
  • Page 45 Temperature Controller MODBUS SIO Driver Cable Diagram 3 Display Cable Notes (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 GP3000 (COM1) AGP-3302B (COM2) Terminal block conversion adapter by Pro-face GP-4*01TM (COM1) Cable length: CA3-ADPTRM-01 GP-Rear Module (COM1) 500m or less (COM2) User-created cable LT3000 (COM1)
  • Page 46 Temperature Controller MODBUS SIO Driver All GP3000 models except GP-3200 series and AGP-3302B Only the COM port which can communicate by RS-422/485 (2 wire) can be used. (Except PE-4000B, PS5000) " IPC COM Port" (page 5) Except GP-4203T All GP4000 models except GP-4100 Series, GP-4*01TM, GP-Rear Module, GP-4201T and GP-4*03T Except SP-5B00 When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block Conversion Adapter, refer to Cable Diagram 3A.
  • Page 47 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Termination Display TERMRX Signal name resistance 100Ω CA3-ADPTRM-01 CA3-ADPCOM-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield Signal name...
  • Page 48 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Shield Signal name Signal name resistance resistance 100Ω 100Ω Display Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (socket) Terminal Block Terminal Block...
  • Page 49 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Signal name Terminal Block Shield Display Termination TERMRX Signal name resistance 100Ω CA3-ADPTRM-01 CA4-ADPONL-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Signal name Terminal Block...
  • Page 50 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side D-Sub 9pin (plug) External Device side Signal name Shield Terminal Block Display Termination TERMRX Signal name resistance 100Ω CA4-ADPONL-01 Shell User-created cable • 1:n Connection Display side D-Sub 9pin (plug) External Device side External Device side Signal name...
  • Page 51 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Termination Display TERMRX Signal name resistance 100Ω CA3-ADPTRM-01 CA3-ADPCOM-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield Signal name...
  • Page 52 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Shield Signal name Signal name resistance resistance 100Ω DATA+ 100Ω Display DATA- GND(SG) Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (socket) Terminal Block...
  • Page 53 Temperature Controller MODBUS SIO Driver • 1:1 Connection External Device side Display side Terminal Block Terminal block Termination Shield Signal name Signal name resistance Termination 100Ω resistance*1 Display • 1:n Connection Display side External Device side External Device side Terminal block Terminal Block Terminal Block Termination...
  • Page 54 Temperature Controller MODBUS SIO Driver • 1:1 Connection External Device side Display side Terminal Block D-Sub 9pin (plug) Termination Termination Shield Signal name Signal name resistance resistance 100Ω 100Ω LINE(+) Display LINE(-) GND(SG) RS(RTS) Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (plug)
  • Page 55 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Termination Display TERMRX Signal name resistance 100Ω PFXZCBADTM1 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield Signal name...
  • Page 56 Temperature Controller MODBUS SIO Driver • 1:1 Connection External Device side Terminal Block Termination Signal name resistance Display 100Ω • 1:n Connection External Device side External Device side Termination Terminal Block Terminal Block resistance 220Ω(1/4W) Termination Shield Signal name Signal name resistance Display 220Ω(1/4W)
  • Page 57 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Shield Signal name Signal name resistance resistance 100Ω DATA+ 100Ω Display DATA- Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (socket) Terminal Block...
  • Page 58 Temperature Controller MODBUS SIO Driver Cable Diagram 4 Display Cable Notes (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 GP3000 (COM1) AGP-3302B (COM2) Terminal block conversion adapter by Pro-face GP-4*01TM (COM1) Cable length: CA3-ADPTRM-01 GP-Rear Module (COM1) 500m or less (COM2) User-created cable LT3000 (COM1)
  • Page 59 Temperature Controller MODBUS SIO Driver All GP3000 models except GP-3200 series and AGP-3302B Only the COM port which can communicate by RS-422/485 (2 wire) can be used. (Except PE-4000B, PS5000) " IPC COM Port" (page 5) Except GP-4203T All GP4000 models except GP-4100 Series, GP-4*01TM, GP-Rear Module, GP-4201T and GP-4*03T Except SP-5B00 When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block Conversion Adapter, refer to Cable Diagram 4A.
  • Page 60 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Display Termination TERMRX Signal name resistance A(+) 100Ω B(-) CA3-ADPTRM-01 CA3-ADPCOM-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield...
  • Page 61 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Signal name Signal name Shield resistance resistance 100Ω A(+) 100Ω Display B(-) Shell • 1:n Connection External Device side Display side External Device side Terminal Block D-Sub 9pin (socket)
  • Page 62 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Signal name Terminal Block Shield Display TERMRX Signal name Termination resistance A(+) 100Ω B(-) CA3-ADPTRM-01 CA4-ADPONL-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Signal name...
  • Page 63 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side D-Sub 9pin (plug) External Device side Signal name Shield Terminal Block Display Termination TERMRX Signal name resistance A(+) 100Ω B(-) CA4-ADPONL-01 Shell User-created cable • 1:n Connection Display side D-Sub 9pin (plug) External Device side External Device side Signal name...
  • Page 64 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Termination Display TERMRX Signal name resistance A(+) 100Ω B(-) CA3-ADPTRM-01 CA3-ADPCOM-01 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield...
  • Page 65 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Signal name Shield Signal name resistance resistance 100Ω DATA+ A(+) 100Ω Display DATA- B(-) GND(SG) Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (socket)
  • Page 66 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side Terminal block Terminal Block Termination Signal name Signal name Shield Termination resistance resistance*1 100Ω A(+) Display B(-) • 1:n Connection External Device side Display side External Device side Terminal Block Terminal block Terminal Block...
  • Page 67 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (plug) Terminal Block Termination Signal name Shield Termination Signal name resistance resistance 100Ω A(+) LINE(+) 100Ω Display B(-) LINE(-) GND(SG) RS(RTS) Shell • 1:n Connection External Device side External Device side Display side...
  • Page 68 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side Terminal Block External Device side Shield Signal name Terminal Block Display Termination TERMRX Signal name resistance A(+) 100Ω B(-) PFXZCBADTM1 User-created cable • 1:n Connection Display side Terminal Block External Device side External Device side Shield Signal name...
  • Page 69 Temperature Controller MODBUS SIO Driver • 1:1 Connection External Device side Terminal Block Termination Signal name resistance Display 100Ω A(+) B(-) • 1:n Connection External Device side External Device side Termination Terminal Block Terminal Block resistance 220Ω(1/4W) Termination Signal name Signal name resistance Display...
  • Page 70 Temperature Controller MODBUS SIO Driver • 1:1 Connection Display side External Device side D-Sub 9pin (socket) Terminal Block Termination Termination Signal name Signal name Shield resistance resistance 100Ω A(+) DATA+ 100Ω Display DATA- B(-) Shell • 1:n Connection Display side External Device side External Device side D-Sub 9pin (socket)

  • Page 71: Supported Devices

    Temperature Controller MODBUS SIO Driver Supported Devices The following table shows the range of supported device addresses. Please note that the actually supported range of the devices varies depending on the External Device to be used. Please check the actual range in the manual of your External Device.
  • Page 72 External Device Display/Setting Value : 3.00% Display value/setting : 3000 Please refer to your External Device manual for details (with/without a decimal point) about data item setting value ranges. PXH series This address can be specified as system data area. Device Bit Address...
  • Page 73 Temperature Controller MODBUS SIO Driver PXG series This address can be specified as system data area. Device Bit Address Word Address 32bits Notes Read Only Bit Data 10001 - 10013 Read Only Word Data (Internal) 30001 - 30062 Read Only Word Data 31001 - 31062 (Engineering Unit) Word Data (Internal)
  • Page 74 Temperature Controller MODBUS SIO Driver PXR (AutoFIX) / PXR (NoAutoFIX) series This address can be specified as system data area. Device Bit Address Word Address 32bits Notes Bit Data 00001 Read Only Bit Data 10001 - 10016 10001 Read Only Word Data (Internal) 30001 - 30037 Read Only Word Data 31001 - 31037...
  • Page 75 Temperature Controller MODBUS SIO Driver PUM series (PUME) This address can be specified as system data area. Device Bit Address Word Address 32bits Notes Read Only Word Data 30064 - 31003 Word Data 40021.00 - 41016.15 40021 - 41016 Write disabled. When you write to the bit address, the Display reads the entire word, sets the defined bit, then returns the new word value to the External Device.

  • Page 76: Device Code And Address Code

    Temperature Controller MODBUS SIO Driver Device Code and Address Code Use device codes and address codes when you set "Device Type & Address" for the address type of the data display or other devices. PXH series Device Code Device Device Name...

  • Page 77: Error Messages

    Temperature Controller MODBUS SIO Driver Error Messages Error messages are displayed on the Display screen as follows: "No. : Device Name: Error Message (Error Occurrence Area)". Each description is shown below. Item Description Error number Name of the External Device where an error has occurred. Device/PLC name is the title of Device Name the External Device set with GP Pro-EX.

This manual is also suitable for:

Pxg seriesPxr seriesPum series