Basic Operation - Fuji Electric Micro-Controller X Socket type Operation Manual

2

Basic Operation

2-1 Basic operation
The below figure illustrates the mode transition and the key operations.
approx.
1 second
1st block
parameter
< Parameter selection mode >
Power ON
Operation Mode
To switch between SV and MV
Press .
SV
To change the setpoint
● Press or to change the value.
● Press to move to the next digit.
● Press to move to the next digit.
approx.
3 seconds
2nd block parameter
< Parameter editing mode >
The parameter setpoint starts blinking.
Press or
To change the digit, use
Press to resist the changed value.
13
MV
parameter
to change the value.
.
approx.
5 seconds
3rd block