Fuji Electric Micro-Controller X Socket type Operation Manual page 56

Parameter functions and setting procedure
[Setting example] Setting SV1, ramp time, and soak time for step1 –––––––––––
Display
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Press and hold the key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the , or
Press the key or wait for three seconds to save the change.
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the , or
Press the key or wait for three seconds to save the change.
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the , or
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
.
keys to change " 0 " to " 50 ."
.
keys to change " 00.00 " to " 00.10 ."
.
keys to change " 00.00 " to " 00.05 ."
54