Fuji Electric Micro-Controller X Socket type Operation Manual page 46

Parameter functions and setting procedure
[Setting example] Setting the PV input upper limit to 1000°C and lower limit to 200°C ––
Display
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Press and hold the key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the or keys to change " 0 " to " 200 ."
Press the key or wait for three seconds to save the change.
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the , or
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
.
.
keys to change " 400 " to " 1000 ."
44