Fuji Electric PUM Series Instruction

PUM Series
Multi-loop module type
Temperature controller
DATA SHEET
PUMCM is the communication module to connect the module
type temperature controller, PUM series, to Mitsubishi's PLC
(MELSEC-Q/A/AnS/FX series) without program.
High-speed communication of maximum 230.4kbps can be
performed via RS-232C, RS-422 or RS-485 interface. Also,
maximum of 16 units (64 channels) of PUMA (control module)
can be connected to one of this module,and maximum 8
units of this module can be connected to 1 communication
port, and it realizes a labor saving wiring, simple engineering
and small space.
FEATURES
I. Programless connection with Mitsubishi's PLC
1. RS-232C, RS-422 or RS-485 high-speed communication
(max. 230.4 kbps)
2. Accessible to the almost all parameters of control
module (PUMA/PUMB)
3. High-speed data loading and setting reflection by high-
speed internal communication with connected control
module (PUMA/B)
4. 1:N configuration is available, which maximum 8 units
of this module can be connected to 1 communication
port.
II. User-friendly structure and functions
1. Lateral connection to 1 unit of this module: Max. 16
units (64 channels) + event input/output module 16
units = total 32 units
Simple wiring for power supply and a labor saving wiring
for communication by programless communication.
2. Detachable structure: Terminal block, main unit, and
the base part.
o Easy wiring with detachable terminal block
o Main units exchangeable without re-wiring
SYSTEM SPECIFICATION
1. Product type: Multi-loop module type temperature
controller
2. Module type
1) Analog module: Total max. 16 units
a) Control module (4 loops)
b) Enhanced input/output (analog) module
- Analog input/output module
- Analog input module (input 4 points/unit)
- Analog output module (output 4 points/unit)
2) Enhanced input/output (digital) module:
- Event input/output module
3) Enhanced communication module: 1 unit
ENHANCED COMMUNICATION MODULE [PUMCM]
(Mitsubishi's PLC Programless Communication)
(input/output 4 points/unit)
Maximum 16 units
(input/output 8 points/unit)
3. Connecting method:
Lateral connecting with connectors
(For power supply and RS-485 commu-
nication, any one of connected modules
is required to be connected)
4. No. of loop, input/output
1) Control loop: Max. 64
2) No.of input / output: DI 128 points / DO 128 points
ENHANCED COMMUNICATION MODULE

SPECIFICATIONS

(Mitsubishi's PLC programless communica-
tion)
1. General specification
(1) Power supply: 24V DC ±10%
(2) Power consumption: Max. 3.2 W (135 mA)
(3) Insulation resistance: 20M: or more (500V DC)
(4) Withstand voltage:
Power supply l loader communication
Power supply l RS-232C,RS-422,RS-485
(5) Applied standards:
UL, C-UL, CE marking, RoHS directive
[Pending for UL, C-UL marking]
PUMCM
[when 24V DC is applied]
1000V AC 1 min.
1000V AC 1 min.
EDS11-168b
Date Apr. 1, 2011