[Onof] Hysteresis Mode (040) - Fuji Electric Micro-Controller X Socket type Operation Manual

Parameter functions and setting procedure
oNoF Hysteresis mode (040)
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
Selects the hysteresis operation during two-position control.
Setpoint
oFF Performs two-position control with the range between [SV+HyS/2] and [SV-HyS/2].
oN Performs two-position control with the range between [SV, SV+HyS] and [SV, SV-HyS].
Setpoint: oFF
Reverse
Normal
Operation
[Setting example] Setting the hysteresis mode to OFF –––––––––––––––––––––
Display
1.
2.
3.
4.
5.
6.
HyS
SV
HyS
SV
Press and hold the key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the or keys to change " oN " to "oFF ."
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Description
Setpoint: oN
HyS
SV
HyS
SV
Operating procedure
.
40