[Pcut] Output Limit Types (108) - Fuji Electric Micro-Controller X Socket type Operation Manual

PCUt Output limit types (108)
[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
You can choose whether to apply the limit on the output value or let it exceed the limit.
Setpoint Lower limit
0 -5%
1 limit
-5%
2
3 limit
The output changes according to the limit, as follows.
●
Output value
(after limiting)
105%
No limit
PHC
Limit
PLC
No limit
PLC
−5%
[Setting example] Setting the high and low limit setting to "limit" ––––––––––––––
Display
1.
2.
3.
4.
5.
6.
Upper limit
105%
105%
limit
limit
Limit
PHC
Output value
(before limiting)
Press and hold the key for about five seconds during the SV/PV display.
appears.
➔ ➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the or keys to change " 0 " to " 3 ."
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
.
63
3rd block parameter