Parameter functions and setting procedure
When alarm action code is changed, alarm set value may also become different
●
from previous settings.
Power-cycle the controller after you change the alarm type.
●
[Setting example]
Setting the type of the alarm 1 to "upper limit deviation alarm with hold" ––––––––
Display
1.
2.
3.
4.
5.
6.
Press and hold the
key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the
key to display
Press the
key.
➔ The setpoint starts blinking.
➔
Press the
,
or
Press the
key or wait for three seconds to save the change.
Press the
key.
➔ The screen returns to the SV/PV display.
➔
Operating procedure
.
keys to change " 0 " to " 8 ."
50