Changing Sv (Set Value) - Fuji Electric Micro-Controller X Socket type Operation Manual

Basic Operation

2-2 Changing SV (Set value)

[Description] –––––––––––––––––––––––––––––––––––––––––––––––––––––––
The SV is a target value for control.
SV must be within the range between [ SV-L] (lower limit) and [SV-H] (upper limit) which belong to Pid
●
parameter.
Related parameters:
SV (Set value) lower limiter [SV-L], SV (Set value) upper limiter [SV-H] (see page 58)
●
[Setting example] Changing the SV from 250°C to 1195°C –––––––––––––––––––
Display
1.
2.
1. Check that the PV/SV display is shown.
Press , or keys to change SV to "1195".
➔ The change become effective immediately.
➔
Operating procedure
14