Fuji Electric Micro-Controller X Socket type Operation Manual page 58

Parameter functions and setting procedure
[Setting example] Setting the ramp soak mode to 1 ––––––––––––––––––––––––
Display
1.
2.
3.
4.
5.
6.
Operating procedure
Press and hold the key for about three seconds during the SV/PV display.
➔ appears.
➔
Press the key to display
Press the key.
➔ The setpoint starts blinking.
➔
Press the key to change " 0 " to " 1 ."
Press the key or wait for three seconds to save the change.
Press the key.
➔ The screen returns to the SV/PV display.
➔
.
56